FS17 – Steyr 8080 Turbo SK1 Tractor V2.0

Steyr 8080 Turbo SK1 Tractor mod for FS17.

Hello, today we introduce you the LS17 version of the STEYR 8080 Turbo SK1.

Version 2 Used
– second XML inserted for 8080a SK1 ÜS (Überersserien) Model BJ 1986
– 8080a SK1 ÜS has a STEYRMatic load gearbox (16v / 16r gears) 40 kmh
– 8080a SK1 ÜS is only available as 4WD and has the SK2 roof (STEYR roof trim front + roof hatch)
– 8080a SK1 ÜS: Exhaust models; Exhaust + flap, exhaust with bent pipe, low noise exhaust
– 8080a SK1 ÜS: Front front + added / dismantled
– 8080a SK1 ÜS: Front window for opening
– other Dieseltank assembled (ned perfect but can be left ^ ^) and installed
– VA (front axle) protection or VA + floor protection (for forestry set) buyable via 2. Design Konfi
– wheel set standard 2WD installed (8080 SK1)
– Motorkonfi BJ 1979, jz no longer has “slanting” metal plates in the rear cotis
– Low noise exhaust removed at 8080 SK1 (30 kmh version)
– Sound fix in the xml
– original disc spacers front (only with 8080a SK1 ÜS) + installed at the rear

It will remain the only SK1 model for LS17, but there will be updates. This tractor is intended for people who like to play with old-timer as a supplement to the Plus 768. It has a 30 kmh transmission with 16v / 8r gears.
INFO:

Construction period: 197 (8) 9- 1995 / (96)
Engine: Steyr WD411.88 (70HP, as of BJ 1984 72 hp)
Transmission: Synchronized STEYR group transmission with 16 forward / 8 reverse gears, 30 kmh version
Tank capacity: 86l
Weight: approx. 3300 kg
Type plate
Sound is from a STEYR 8080 Turbo SK2
A great THANKS goes to forbidden-mods for sharing to the Siloking Terminal.

features:
from the outside:

Fender front (on / off) Button R (only for 2WD, 4WD does not have front mud)
Doors on / off button R
open / close left button R
Opening / removing snow chains (front / rear) Button R

Shop configurations:
Coupling Products:
Standard / front spoiler: (atacher joint installed)
Front hydraulics + front spoiler (Dynamic Hose ready)

Front loader attached:
(Dynamic Hose ready)
with front protection
without front protection

Engine Version: 70 hp without “Turbo” -letter on the bonnet:
Exhaust + flap BJ 79 (including sticker, STEYR Weltmeisterserie 1979)
Exhaust pipe BJ 82
Low noise exhaust 1 (not original, retrofitted / selfmade)
72 hp with “Turbo” lettering on the bonnet:
Exhaust + flap BJ 84
Exhaust pipe BJ 85
Low noise exhaust 2 (not original, retrofitted / selfmade)

Wheel setup:
4WD:
Original: front: 280/85 / R24 rear: 340/85 / R38
Standard: front: 360/70 / R24 rear: 420/85 / R34
Original + standard: front: 280/85 / R24 rear: 420/85 / R34
Standard + twins: front: 360/70 / R24 rear: 420/85 / R34 + twins
2WD:
Original: front: from the rear 768: 340/85 / R38
Pipe rims: front: from the rear 768: 230/95 / R44

Design:
STEYR roof mount front
STEYR roof trim front + rear

Other functions:
IC control:
Rear, side windows and doors (including door closing) for opening / closing
FH-Unterlenker, co-driver’s footrest and sun visor fold in / out
windshield wipers
cabin light
Siloking Terminal fade-out / fade-out

Animated / Illuminated:
Tacho, tank and temperature display as well as pressure air display
Blinker / warning indicator (including turn signal (from a Steyr 8130a SK2))
Blinker / warning light indicator works as in real:
Tractor alone = 1 beam flashes
Tractor + 1 trailer = 2 lights flashing
Tractor + 2 trailers = 3 lights flashing
license plate light
Charge indicator light integrated (battery lit jz at engine start)
“provisional” animated pedals; Accelerator pedal, brake pedal + clutch: IMPORTANT! Drive control with active reversing circuit (green arrow must be visible -> direction change) otherwise the pedal animation does not fit. (Select tractor)
at selected tractor without attached trailers / equipment: animated rear hydraulic + lever (right in the tractor) TASTE V,
animated lever for the PTO coupling (on the left in the tractor) BUTTON B is a small tool for moving around the cabin, this is a pure look for the levers to be attached to the attached devices, you need a suitable script, we guess. 🙂 With trailers attached you can lift the HH (rear hydraulics) (tractor must be selected) and the lever moves.
The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical.

Others:
Textures reworked
Model has been revised
Chain saw installed as decoration
genuine tire moldings were used
washable
Indoorsound (reacts to open windows or doors)
Working light front Button NUM 5
Working light rear button NUM 6
swing axle
Behrahrerskript installed
Low beam + high beam + working light slightly yellowish

Required Mod – Front Equipment Pack

Required Mod – Drive Control

Required Mod – Gearbox Addon

Credit(s):
Modell: Urmodell: MB3D Modelling, Umbau/LS17 ready: STEYR Modding Team, Auspuff Modell gecknicktes Rohr: rs123456, Siloking Terminal: forbidden-mods/Bremi456 Textur: MB3D Modelling, STEYR Modding Team, Siloking Terminal: forbidden-mods/Bremi456 Script: Giants Software, Fruktor, Rival (RivalBomb), Manuel Leitner, PeterJ - euroDZN, Sven777b, Modelleicher, Alex2009, BM-Modding (Dynamic Hose Skript) Idee / Konzept: STEYR Modding Team Tester: STEYR Modding Team Sonstige: Sounds: Agrarprofi - Agriculture, STEYR Modding Team Pflegereifen (Felgen): CebuljCek Modding Schneeketten: CebuljCek Modding

File Details:ZIP / 43.8 MB
FS17 – Steyr 8080 Turbo SK1 Tractor V2.0 Download File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *