FS17 – Steyr 8120 Turbo SK1 Tractor V2.0

Steyr 8120 Turbo SK1 Tractor mod for FS17.

Hello, so since the 4 cylinder SK1 model is a bit too small for some activities, such as bale presses ect, we have brought the 6 cylinder, 8120 SK1 to life in just 2 days πŸ™‚ The Sk1 model from the previous LS version was reworked , (Roof cut out, wider Kotis rear mounted, exhaust cut and exchanged, …)

Version 2
– Arbeisschinis added
– 40 kmh transmission removed
– Others

Info:
Construction period: 1978 – 1984
Weight: 4400kg (4WD version)
Engine: STEYR 611.86, 6 cylinders with a displacement of 5.2l
Gearbox: gives meherere, we have the 30-speed Deutz TW90 with 15v / 5r gears, and once the gearbox with the retrofit set (18v / 6r speed -> 40 kmh)
Tank load: 122l
Power: 100 HP according to -DIN specification
Engine history: Front wheel drive (4WD)
Cabine: Steyr Super comfort First generation cabin (SK1)
A great THANKS goes to forbidden-mods for sharing to the Siloking Terminal.

features:
from the outside:
Front fender on / off button R (only with 4WD, with 2WD are fixed)
turn left door on / off button R
open / close left button R
Snow chains (front / rear) on / off button R (with 4WD, with 2WD only rear)

Shop configurations:
Coupling Products:
Standard / front spoiler: (atacher joint installed)
Front hydraulics + front spoiler (Dynamic Hose ready)

Front loader attached:
(Dynamic Hose ready)
with front protection
without front protection

Engine version:
100 hp without “Turbo” lettering on the bonnet:

Exhaust + flap BJ 78: (SK1 roof) 30-speed gearbox (15v / 5-speed)
Low noise exhaust BJ 80: (SK1 roof) 30-speed gearbox (15v / 5-speed)

100 hp with “Turbo” lettering on the bonnet:
Exhaust + flap BJ 84: (SK2 roof, roof light front + roof hatch) 40-speed gearbox (18v / 6r speed)
Low-noise exhaust BJ 84: (SK2 roof, roof light front + roof hatch) 40-speed gearbox (18v / 6-speed)

Wheel setup:
4WD:
Original: front: 340/85 / R24 rear: 460/85 / R34

2WD:
Original: front: from 8080 SK1 rear: 460/85 / R34

Design:
Design Confi 1:
round arbeisscheini Koti in the back left
RUL middle
RUL rear
round Arbeisscheini Koti rear left + RUL center
round Arbeisscheini Koti rear left + RUL behind

Design Confi 2:
VA (front axle) protection
VA + floor protection, intended for a forestry set (chainsaw + benzine tank is visible)

Other functions:
IC control:
Rear windows, side windows and left door (including door closing sound) for opening / closing
FH-Unterlenker, co-driver’s footrest and sun visor fold in / out
windshield wipers
cabin light
Siloking Terminal fade-out / fade-out

Animated / Illuminated:
Tacho, tank and temperature display as well as pressure air display
Blinker / warning indicator (including turn signal (from a Steyr 8130a SK2))
Blinker / warning light indicator works as in real:
Tractor alone = 1 beam flashes
Tractor + 1 trailer = 2 lights flashing
Tractor + 2 trailers = 3 lights flashing
license plate light
Charge indicator light integrated (battery lit jz at engine start)
“provisional” animated pedals; Accelerator pedal, brake pedal + clutch: IMPORTANT! Drive control with active reversing circuit (green arrow must be visible -> direction change) otherwise the pedal animation does not fit. (Select tractor)
at selected tractor without attached trailers / equipment: animated rear hydraulic + lever (right in the tractor) TASTE V,
animated lever for the PTO coupling (on the left in the tractor) BUTTON B is a small tool for moving around the cabin, this is a pure look for the levers to be attached to the attached devices, you need a suitable script, we guess. πŸ™‚ With trailers attached you can lift the HH (rear hydraulics) (tractor must be selected) and the lever moves.
The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical.

Others:
Textures reworked
Model has been revised
Chain saw installed as decoration
genuine tire moldings were used
washable
Indoorsound (reacts to open windows or doors)
Working light front Button NUM 5 (only for 8120 Turbo SK1, 40 speed version)
Working light rear button NUM 6
swing axle
Behrahrerskript installed
Low beam + high beam + working light somewhat yellowish as well as in real life

Required / Recommended Mods:
Front-equipment-Pack:
https://www.simulatorgamemods.com/fs17-steyr-front-equipment-pack-v2/

Drive Control:
https://www.simulatorgamemods.com/fs17-drive-control-mod-v-4-10/

Gearbox Add On:
https://www.simulatorgamemods.com/fs17-gearbox-addon-mod/

Steyr Front Equipment Pack:
https://www.simulatorgamemods.com/fs17-steyr-front-equipment-pack-v2/

Credit(s):
Modell: Urmodell: MB3D Modelling, Umbau/LS17 ready: STEYR Modding Team,, Siloking Terminal: forbidden-mods/Bremi456 Textur: MB3D Modelling, STEYR Modding Team, Siloking Terminal: forbidden-mods/Bremi456 Script: Giants Software, Fruktor, Rival (RivalBomb), Manuel Leitner, PeterJ - euroDZN, Sven777b, Modelleicher, Alex2009, BM-Modding (Dynamic Hose Skript) Idee / Konzept: STEYR Modding Team Tester: STEYR Modding Team Sonstige: Sounds: STEYR Modding Team Schneeketten: CebuljCek Modding

FS17 – Steyr 8120 Turbo SK1 Tractor V2.0 Download File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *