FS17 – Steyr 8130A SK2 Turbo Tractor V2.5

Steyr 8130A SK2 Turbo Tractor mod for FS17.

Hello, today is it so far, the V1 of the 8130a SK2 we provide you times.

Version 2.5 Used
– warnings in the log should be jz away
– Sound changed at BJ88 (exhaust + flap)
– Sound fix in the xml
– other air filter (air filter installed at BJ 88 + BJ 90)
– Windscreen wiper animation revised
– Chain saw only visible in forestry version
– atacherJoint with front weight support reoriented / adapted to the IHC frontweights of Kreters Island

It would still be one or the other planned but we will then integrate into updates. πŸ™‚
The basis is the Steyr 8110a Turbo SK2. The 8130 has the features of the 8110a SK2 and the 8090a Turbo SK2.
The snow chains + twin tires are on
ATTENTION: This entry is extended / updated.

Construction period: 1984 – 1995 / (96)
Engine: Steyr WD611.88 (110 PS, as of BJ 1992 115 hp)
Transmission: STEYRMatic
Tank capacity: 140l
BJ: 1993
Weight: 4440 kg
Type plate
Sound is from colleagues John his 140 PS strong Steyr 8130a Turbo SK2 municipal
The snow chains no longer fit the tire profile as well. The times would have to be revised. The twin wheels have no tire tracks and originate as well as the snow chains from LS13? / LS15 from CebuljCek Modding. The twin tires + snow chains we have times as “emergency solution” so installed, since we work on several projects at the same time.
We ask for your understanding.

Functions: from the outside:
Fitting front / front fender button R
Doors on / off button R
open / close left button R
Opening / removing snow chains (front / rear) Button R
Twin tire (rear only) on / off button R

Shop configurations:

Coupling Products:

Standart: (only atacher joint, intended for buyable frontweights or crockery)
Front muzzle: (atacher joint installed, for riding trailers)
Front hydraulics + front sprocket
Snowplow plate + atacher Joint
Front weight holder

Front loader attached:

Yes or no

Engine version:

Standard engine: WD 611.88 (115 hp)
Optional: stronger injection pump (+10 hp)

Wheel setup:

Standard tires: front: 380/85 / R24 rear: 460/85 / R38
Wide tires: front: 540/65 / R24 rear: 600/65 / R38
Care: front: 230/95 / R34 rear: 230/95 / R44


RUL (round light): intended for the “normal” / red-white version
Standart (nix)
RUL (RUL only)
Electronic (EHR + Ekectronic lettering on the side plates)
Rear roof light (roof only)
Electronic + RUL
Roof light rear + RUL
Electronic + RUL + rear roof light
Electronic + roof light
different designs (eg municipal, forestry, Marshall, …)

Other functions:

IC control:

Front, rear, side windows, roof hatches and doors (including door closing) for opening / closing
FH-Unterlenker, co-driver’s footrest and sun visor fold in / out
windshield wipers
cabin light

Animated / Illuminated:

Tacho, tank and temperature display
Blinker / warning indicator (including turn signal (from a Steyr 8130a SK2))
Blinker / warning light indicator works as in real:
Tractor alone = 1 beam flashes
Tractor + 1 trailer = 2 lights flashing
Tractor + 2 trailers = 3 lights flashing
license plate light
Charge indicator light integrated (battery lit jz at engine start)
“provisional” animated pedals; Accelerator pedal, brake pedal + clutch: IMPORTANT! Drive control with active reversing circuit (green arrow must be visible -> direction change) otherwise the pedal animation does not fit. (Select tractor)
at selected tractor without attached trailers / equipment: animated rear hydraulic + lever (right in the tractor) TASTE V,
animated lever for the PTO coupling (on the left in the tractor) BUTTON B is a small tool for moving around the cabin, this is a pure look for the levers to be attached to the attached devices, you need a suitable script, we guess. πŸ™‚ With trailers attached you can lift the HH (rear hydraulics) (tractor must be selected) and the lever moves.
The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical.

Modell: Urmodell: MB3D Modelling, Umbau/LS17 ready: STEYR Modding Team, Siloking + Grimme Terminal: forbidden-mods/Bremi456 Textur: STEYR Modding Team, Siloking + Grimme Terminal: forbidden-mods/Bremi456 Script: Giants Software, Fruktor, Rival (RivalBomb), Manuel Leitner, PeterJ - euroDZN, Sven777b, Modelleicher, Alex2009, BM-Modding (Dynamic Hose Skript) Idee / Konzept: STEYR Modding Team Tester: STEYR Modding Team Sonstige: Sounds: STEYR Modding Team Pflegereifen (Felgen): CebuljCek Modding Schneektten: CebuljCek Modding Zwillingsreifen: CebuljCek Modding

FS17 – Steyr 8130A SK2 Turbo Tractor V2.5 Download File

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *