ETS2 – [Official] Physics 7 Full Man Hot Fix V1.1 (1.34.x)


[Official] Physics 7 Full Man Hot Fix V1.1 mod for ETS2 1.34.x.

** Mod version 1.1 Update:
- Hot fix for New MAN Euro 6 game crash. From now on this mod only supports 4x2, 6x4 and 8x4 for New MAN Euro6. When you buy New MAN E6, do not buy with 6x2, 6x2/4 or any 6x2 based.  
- Reduces the maximum cabin roll angle (as suggested by a real life truck driver).
- Differentiates between older and newer truck models by increasing front suspension softness of newer models by 25% (as suggested by a real life truck driver).
Trucks considered to be in the newer model group are:
New Man E6, New Gen Scania, Volvo 2012, DAF E6, Highway, Actros 2014
You will find these newer models to be a little bit softer than older models in some situations. This brings the game to another level of realism.

This is the full version of Physic's 7 Mini. The difference between the 2 versions is:

Physics 7 Mini:
- Cabin weight 650 kg (same as vanilla)
- Builtin Air Ride B

Physics 7 Full:
- Cabin weight 1,000 kg. The 1 ton cabin of the full version makes the cabin movement more obvious and complete.
- Built in its own unique air seat. (never published before)
- Less max cabin roll angle (since v1.1 (as suggested by a real life truck driver))
- Newer truck models are softer than older truck models (since v1.1 (as suggested by a real life truck driver))
The newer models are: New MAN E6, DAFF E6, Highway, New Gen Scania, Actros 2014, Volvo 2012

This mod has been tested and approved by real life truck drivers to be very close, accurately simulating real life trucks.

PLEASE KEEP IN MIND THAT:

1. This mod aims to be natural, realistic and close to real life truck as much as possible.

2. No mods can fix the SCS' road surface too smooth problem. When you drive with this mod you have to keep in mind that SCS' roads are unrealistically smooth. So there is no way that your truck will bounce all the time like on real life roads. Most other physics mods make your truck shake too freaky and insane. This mod makes sure that your truck responds naturally and realistically to each bump, corner SCS offers.

3. All 8x4 models are intentionally made harder suspension to prevent the nose dipping too low.

4. This mod works best with the default value of "g_suspension_stiffness" and "g_truck_stability" if you have adjusted those values before, please make sure you reset them to default before you play with this mod.

Credit(s):
Momo

File Detail: 112 KB / SCS
DOWNLOAD(Mirror Server #1) Report Post

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *